Table of Contents
Advertisement
Step 3:
Attach FC single mode fiber cable from the VF-10x-T
to VF-10x-R in the remote site.
Step 4:
VF-10x-R (Receiver): Connect coaxial cable from
monitor/DVR to video BNC port of the VF-10x-R.
Step 5:
Connect the 5V DC power adapter to the VF-10x-T/
VF-10x-R and verify that the power LED lights up.
Step 6:
Turn on the power of the analog camera/monitor; the
video LED (green) should light up when all cables are
attached.
Coax
Video
|O|O|
Speed Dome
Figure 3-1 VF-10x-T/VF-10x-R standalone installation
Up to 20km
VF-10X-T
Transmitter
Coax
Video
|O|O|
VF-10X-R
Receiver
Video
|O|O|
DVR / Monitor
Control Keyboard
Fiber-optic
Video Line
Serial Line (RS485)
15
Advertisement
Table of Contents
