Storage - Makita EM400MP Owner's Manual

Lubricating moving parts
NOTICE: Follow the instruction of the frequency and amount of
grease supplied. Otherwise insufficient lubrication may damage
moving parts.
Gear case:
Supply grease (Shell Alvania 2 or equivalent) to the gear case
through the grease hole every 30 hours of operation. (Genuine
Makita grease may be purchased from your local Makita dealer.)
Drive axle:
Supply grease (Shell Alvania No.2 or equivalent) every 30 hours of
operation.
Overall inspection
• Tighten loose bolts, nuts and screws.
• Check for damaged parts. Ask Makita authorized service center
to replace them.

Storage

WARNING:
Follow the warnings and precautions in the chapter "Safety
precautions" and the instruction manual of the power unit.
When storing the brushcutter attachment separated from the power
unit, put the cap onto the end of the shaft.
9