Transporting Your Printer - Canon G4000 series Online Manual

Transporting Your Printer

When relocating the printer for changing your living place or repairing it, make sure of the following.
Important
• You cannot take ink out of ink tanks.
• Check if the tank cap is completely inserted. If the ink tank cover is not completely closed, insert the
tank cap properly.
• Do not tilt the printer. Ink may leak.
• Please handle with care and ensure the box remains flat and NOT turned upside down or on its side, as
the printer may be damaged and ink in the printer may leak.
• Pack the printer in a sturdy box so that it is placed with its bottom facing down, using sufficient
protective material to ensure safe transport.
• With the cartridge left installed in the printer, press the ON button to turn off the power. This allows the
printer to automatically cap the print head, thus preventing it from drying.
• Do not remove the cartridge. Ink may leak.
• When transporting the printer, pack the printer in a plastic bag so that ink does not leak.
• When a shipping agent is handling transport of the printer, have its box marked "THIS SIDE UP" to
keep the printer with its bottom facing down. Mark also with "FRAGILE" or "HANDLE WITH CARE".
1. Make sure that the power is turned on.
2. Press the Setup button, use the
button.
LCD and Operation Panel
3. Use the button to select Lock transport pump and then press the OK button.
4. Use the button to select ON and then press the OK button.
5. Confirm that the ON lamp is off and
button to select Maintenance, and press the OK
unplug the power cord.
156