Freezer Features - Kenmore 7121 series Use And Care Manual

Hide thumbs Also See for 7121 series:
Table of Contents

Advertisement

CAUTION :
To avoid personal injury or property damage.
• Never attempt to adjust a shelf when it is loaded with
food.
• Confirm that shelf is secure prior to loading items onto
it.
To remove and replace a wire shelf:
1. Remove the food from the shelf.
2. Lift up left side of shelf slightly and slide it left as far as
it will go into the center of the left shelf support holes.
The right side of the shelf will release from the support
holes on the right. Raise up right side of shelf to remove
from freezer compartment.
3. To replace, angle right side of shelf up and insert left
side of shelf as far as it will go into the center of the left
shelf support holes. Lower the right side of shelf to align
with right side support holes. Slide the shelf to the right
to secure into the support holes.
NoTe: If icemaker is not in use, the shelf may be
inserted into the higher set of support holes to adapt to
storage needs once the ice storage bin is removed.
4. To relace, holding the shelf diagonally, insert the left
end of the shelf into the center of the shelf supports ont
the side wall.
5. Insert the right end of the shelf into the shelf supports on
the side wall. Rest each end of the shelf on the bottom
of the shelf supports.
Lift up and slide

FREEZER FEATURES

Raise
21

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

6121 series

Table of Contents