Paging Reception (Wait) - Kenwood TH-27A Instruction Manual

4-9-4. Paging Reception (Wait)
1. Tune to the predetermined frequency.
2. Press the F key. then press the DTSS/PAG key to enter
THE PAGING MODE.
- IIi i i
:J
1.l.DD
I'lAPO
P indicates the paging mod e.
Waiting with individual code .
3. When called with your station ID code. the memory
number automatically change to O. The ID code of the
calling station is displayed. (For KENWOOD's trans-
ceivers. This also applies to the following descrip-
tions.) (Example: Frequency: 145.660 MHz. calling
station code: 444)
iI
{I'-' ,-, ,-,
~"
, , ,
ilI APO
Zero is displayed to indicate that the station is
being called.
P fl as hes.
4. The squelch is opened and the calling other party is
heard. (The individual code of the calling station is
stored in memory 0.)
5. Press the PTT switch to respond to the calling station.
~
145.660 MH,
f
~1*4 49
Y
,-'( i -
::' ,_,.Db
ilI APO
After the local station has been called. cancel paging.
Communication can be performed more efficiently.
(*: If the remote station code can not be recognized. E
appears on the display paneL)
ERROR
indicator
ill
APO
These codes are the previous ones.
39