Auto Program - Philips 20PT6446 User Manual

Y Y Y Y Y
ou can auto install programs on your TV ou can auto install programs on your TV
when the CH+ or CH– buttons are pressed. when the CH+ or CH– buttons are pressed.
NOTE : Ensure that the Antenna or Cable signal
connection has been completed before AUTO
PROGRAM is activated.
1
Press the MENU button on the remote
control to show the on-screen menu.
2
Press the CURSOR < or > to scroll
through the on-screen menu until the word
INSTALL is highlighted.
3
Press the CURSOR > to display the
INSTALL menu features.
4
Press the CURSOR < or > to scroll
through the Install features until the word
TUNER MODE is highlighted.
5
Press CURSOR > to start the Auto
Program scanning of channels. Auto
Programming will store all available channels
in the TV's memory then tune to the lowest
available channel when done.
6
. When finished, press the STATUS /
EXIT button on the remote control to
remove the menu from the TV's screen.
When CABLE is selected, channels 1 - 125 are available.
When ANTENNA is selected, channels 2 - 69 are available.
When AUTO is selected, the TV will automatically set itself to
the correct mode based on the type of signal it detects when the
AUTO PROGRAM feature is activated.

AUTO PROGRAM

. This makes it easy for you to select only the TV stations in your area
MENU
< >
VOL
H H
ELPFUL INTS
STATUS /
EXIT
16
Channel Edit
Channel Edit
59
58