Playback Operations - Telefunken TF-FMT19BT Instruction Manual

Instruction manual
the tray. Insert the battery tray into the
remote controller.
Operations
General operations
• Insert the plug of this unit into your
vehicle's cigarette lighter. Set ON/OFF
switch to ON position to switch on this unit.
• Tune your radio to an unused
FM frequency, then match the same
frequency of this unit. Press CH+ button
on the RC to increase frequency by 0.1
MHz; or press CH button on the unit
and then press
increase frequency. Press CH- button
on the RC to decrease frequency by
0.1 MHz; or press CH button on the unit
and then press
to decrease frequency. Also you can
press number buttons on the RC to input
the needed frequency, then press CH+
button to confirm.
• To increase volume level, press
VOL+ button on the RC; or press CH
button on the unit to enable volume
adjustment and then press
on the unit. To decrease volume, press
VOL- button on the RC; or press CH
button on the unit to enable volume
adjustment and then press
the unit.
• After you switch the unit on, the
frequency and volume adjusted by you
will be saved.
• To improve the display angle for
viewing it, you can rotate the cabinet of
this unit in one plane relative to the hinge
4
4
button on the unit to
button on the unit
button
button on
axis.
AUX line input
Use the provided audio cable to
connect an MP3/MP4 players or another
external device to the AUX input of this
unit. When using this function, press
button on the RC or
unit to stop playback of USB or memory
card, and all functions will be controlled
by the external device.
Card reader function
Connect the USB port of this unit to a
PC with a special connecting USB cable
(not included). Insert a memory card into
the slot of this unit. The PC will recognize
this unit as an external disc and you can
browse the contents of the memory card
on your PC.
Mobile phone charger
When this unit is powered from car
lighter socket, connect the USB port
of this unit to your mobile phone with
a special connecting USB cable (not
included). This unit will serve as mobile-
phone charger.

Playback operations

• Insert a USB or SD/MMC card
containing MP3 files into USB port
or memory card slot of this unit
correspondingly. It will play and transmit
the MP3 files automatically.
• Press button on the RC or
button to stop or continue playback. If
you switch off the unit during playback
and extract the USB/card, the unit will
memorize the last played track, and next
button on the