Section 4: Operations; Loading Nailer - Grizzly T27338 Owner's Manual

SECTION 4: OPERATIONS

Wear protective
equipment when
using this tool.
Disconnect before
service or fastener
replacement.
Never exceed max
PSI rating for tool.
L- or T-Cleat Nail
(100 Pc. Capacity)
Deflection due to material irregulari-
ties can cause puncture injuries to
improperly placed hands or body
parts. Always position hands and
body away from fastener trajectory
and deflection paths.
If you have never used this type
of tool or equipment before, WE
STRONGLY RECOMMEND that you
read books, trade magazines, or get
formal training before beginning any
projects. Regardless of the content
in this section, Grizzly Industrial
will not be held liable for accidents
caused by lack of training.
-10
-
EYE/EAR INJURY
HAZARD!
ACCIDENTAL
START HAZARD!
AIR PRESSURE
HAZARD!
16 Ga.
1 / "–2" Long
1
2

Loading Nailer

The Model T27338 shoots both nails and
staples.
Nail Replacement Guidelines
16 Ga.
L- or T-Cleat Nail
1 / "–2" Long
1
2
(100 Pc. Capacity)
Note: Use 1 ⁄ " nails to install
1
2
thick hardwood flooring. Use 2" nails to
install ⁄ "- or ⁄ "-thick hardwood flooring.
3 25
4 32
Staple Replacement Guidelines
15.5 Ga.
/ " Crown Staple
1
2
1 / "–2" Long
1
2
(120 Pc. Capacity)
To load nailer:
1. DISCONNECT NAILER FROM AIR
SOURCE!
2. Pull magazine pusher back completely,
and secure pusher with lock button, as
shown in Figure 7.
Lock Button
Figure 7. Location of pusher, lock button.
Model T27338 (Mfd. Since 01/15)
/
1
2
(120 P
⁄ "- or ⁄ "-
1 5
2 8
Pusher
15
" Cr
1 / "
1
2