Troubleshooting - Philips VOX300 User Manual

Telephone troubleshooting
PROBLEMS
The battery icon is not
blinking when the handset is
placed on the base.
No dialling tone.
No ring tone.
The range icon does not
appear.
The range icon is blinking.
Crackling on the line.

Troubleshooting

CAUSES
• Bad battery contact.
• Dirty contact.
• Batteries are full.
• No power.
• Batteries are empty.
• You are too far from the
base station.
• Wrong line cable.
• Line adaptor (when
needed) not connected to
the line cord.
• The ring tone is
deactivated.
• No mains power.
• The handset is too far
from the base station.
• Handset not registered to
the base station.
• You are too far from the
base station.
• The base station is too
close to electrical
appliances, reinforced
concrete walls or metal
doorframes.
SOLUTIONS
• Move the handset slightly.
• Clean the contact with a
cloth moistened with
alcohol.
• No need to charge.
• Check the connections.
Reset the phone : unplug
and plug back in the
mains.
• Charge the batteries at
least 24 hours.
• Move closer to the base
station.
• Always use the line cable
provided.
• Connect the line adaptor
(when needed) to the line
cord
• Increase the volume
(page 26)
• Check connections.
• Move closer to the base
station.
• Register the handset to
the base (page 31).
• Move closer to the base
station.
• Move the base station to
find a better place (the
higher the better).
EN
41