CORONA GR7SF Instruction Manual

Thank you for purchasing CORONA's GYRO-Embedded S-FHSS compatible receiver. This
production can supply enhancement smooth with FUTABA S-FHSS link in the flight.
Compatibility:
CORONA 2.4GHz S-FHSS Compatible Receiver is designed to use with FUTABA S-FHSS 2.4GHz
transmitters, such as T6J,T8J,T10J and T14SG under S-FHSS protocol mode.
Feature:
Mode supply: No mixer, Dual-aileron, V-tail mixer, Delta mixer
Independent simple gyro gain adjustment for Aileron, Elevator and Rudder
S.BUS output support expanding servo channels @the 8
Support gyro function switch on and off in flying by Switching signal of CH5

Specifications:

 Voltage Range :3.6~8.5V
 Operating Current: 60mA max
 Operation temperature: -10~70 degC
 Latency: 6.8mS
 Sensitivity: about -96dBm
 Weight: 16g
Bind procedure:

Turn on the S-FHSS transmitter

Connect the battery to the receiver while pressing receiver's F/S button.

Red LED light on and Green LED off when searching signals, and turn to Green LED
light on and Red LED off indicate bind is succeeded.

Installation Guide:

 Make sure that your plane has good status before installing GR7SF and other electrical device
on it.
 The receiver need to be firmly mounted near the gravity of the plane by double side tape,
refer to illustration below.
GR7SF Instruction manual
channel
th