Delete A Baby Unit; Set The Screen Off Time Of The Parent Unit; Zoom; Night Vision Mode - Motorola MBP482 User Manual

3.8

Delete a Baby Unit

You can choose to remove a paired Baby Unit from the Parent Unit.
1. Press when the Parent Unit is in camera viewing mode.
2. Press < or
3. Press or
4. Press O, then < or
5. Press O to confirm your selection.
NOTE
You cannot delete a Baby Unit if it is the only one paired.
3.9

Set the screen off time of the Parent Unit

You can set the screen off time of the Parent Unit after being in idle mode for a
particular time interval.
1. Press when the Parent Unit is in camera viewing mode.
2. Press < or
3. Press or
4. Press O to confirm your selection.

3.10 Zoom

You can zoom in or out while viewing the image from Baby Unit.
1. Press to zoom in.
2. Press and hold <,
down correspondingly.
3. Press to zoom out.

3.11 Night Vision Mode

The Baby Unit has infra-red LEDs for picking up clear images in the dark. When
the built-in light sensor on the front of the unit detects a low level of ambient
light, the LEDs will activate automatically and the screen on the Parent Unit will
display in black and white. The
screen.
Using Your Baby Monitor
scroll to .
to select the desired Baby Unit (
to choose
to scroll to .
60m
select ( ,
, or to move the zoomed image left, right, up or
icon will be displayed at the top of the
1 2 3
, ,
YES NO
( ) or (X).
30m 5m OFF
, or ).
4
or ).
14