Voice Recognition System Operation - Subaru starlink Owner's Manual

VOICE RECOGNITION SYSTEM OPERATION

NOTE
Voice commands may not be recognized if:
Spoken too quickly.
Spoken at a low or high volume.
Driving with a window open.
Passengers are talking while voice commands are spoken.
The air conditioning speed is set high.
When air from the ventilator blows directly toward the
microphone.
In the following conditions, the system may not recognize the
command properly and using voice commands may not be
possible:
The command is incorrect or unclear. Note that certain words,
recognize.
There is excessive background noise, such as wind noise.
VOICE RECOGNITION SYSTEM OPERATION
1.
Press the talk switch.
After the voice recognition top screen has been
displayed, speech guidance will commence.
196
2.
Say the command.
When selecting
Help
commands supported by the system are listed.
To cancel voice recognition, select
and hold the talk switch.
NOTE
Turn the " " knob, or use the volume control switch on
the steering wheel to adjust the speech guidance volume.
The system's voice recognition function cannot be used while
using Siri. Start the voice recognition function after exiting Siri.
(Help) or saying "Help", all
, or press