Maytag DWC7400AAW Use And Care Manual page 10

Options:
Indicator Light:
Temp Boost Sensor:
The Heating Delay light indicates that the main
If for any reason the incoming water wash is being extended to heat the water to
temperature is below 120°F, press the On proper temperature.
button to assure the water is heated to proper
temperature for best cleaning and drying
Adding
a Forgotten Item:
results. The main wash will be extended and the
Heating Delay light will turn on. For best cleaning, the forgotten item should be
Press the Off button to cancel the Temp Boost added early in the cycle.
Sensor. 1. Unlatch the door and wait until the sound of
circulating water stops.
Fan Dry Options:
2. Open the door and add the item.
Press the Heat button to turn the heating
element on during the fan dry period. This 3. Pause before latching the door. The cycle will
option provides faster drying, continue at the point it was interrupted.
Press the Air button to turn the heating element
off during the fan dry period.
To Start Dishwasher:
After loading set the dial to the desired cycle.
Press button for desired options.
NOTE: Run the water from the hot water tap to
clear the line of cold water before
starting,
Press the door until it latches. The cycle will
begin with a drain prior to fill.
PAGE 9