Advertisement
QUICK START GUIDE
1.
Press the
POWER (CJJ)
button on the front panel or the
POWER (CJJ)
button on the remote control.
2.
Insert a DVD, CD, or MP3 disc (label toward headliner) into the disc slot located on the side of the monitor. The player will pull the disc in automatically.
NOTE:
Do not force the disc in the slot. The unit must be set to the DVD source to insert a disc.
3.
Press the screen release button, the screen will drop down a short distance.
4.
Tilt the screen to a comfortable viewing position. The screen has a built-in stop. Do not force it past this stop, otherwise damage will occur.
5.
When the DVD menu appears, select the menu item using the
+I-
buttons on the front panel and press the Play (
~I
II) button to start the DVD playing.
On the remote control press the
~~
~~
buttons to select the menu item and then press the Play (
~
II) button to start the movie playing.
6.
If using IR wireless headphones, first turn the volume control to its lowest setting, press the power button and increase the volume to a comfortable
listening level.
7.
If audio playback through the vehicle radio is preferred use the following steps:
Tune your vehicle's radio to an unused station between 88.1 MHz and 91.1 MHz that either unused or is very weak station
Press the FMM button on the front panel or the FMM ON/OFF button on the remote control, FM ON appears on the screen.
Press the CHANNEL SELECT button to set the FM Modulator frequency to the frequency setting on the vehicle radio.
Channel
Frequency
Channel
Frequency
Channel
Frequency
Channel
1
88.1 MHz
2
88.3 MHz
3
88.5 MHz
4
5
88.9 MHz
6
89.1 MHz
7
89.3 MHz
8
9
89.7 MHz
10
89.9 MHz
11
90.1 MHz
12
13
90.5 MHz
14
90.7 MHz
15
90.9 MHz
16
Frequency
88.7 MHz
89.5 MHz
90.3 MHz
91.1 MHz
Note: If driving long distances it may be necessary to change the vehicle radio to another weak station and then change the FM modulator to the same
frequency if there is interference with a local FM station.
7
Advertisement
