Erase The Current Configuration Settings; View Wireless Access Points In Your Area - NETGEAR C7100V User Manual

Erase the Current Configuration Settings

You can erase the current configuration and restore the factory default settings. You might
want to do this if you move the modem router to a different network. (See
page 123).
To erase the configuration settings:

1. Launch an Internet browser from a computer or mobile device that is connected to the
network.
2. Type http://www.routerlogin.net or http://www.routerlogin.com.
A login window opens.
3. Enter the user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Administration > Backup Settings.
The Backup Settings page displays.
5. Click the Erase button.
The factory default settings are restored. The user name is admin, the password is
password, and the LAN IP address is 192.168.0.1. DHCP is enabled.

View Wireless Access Points in Your Area

You can view WiFi networks or access points in your area and select and join a WiFi network.
To manage your WiFi access point (AP):

1. Launch a web browser from a computer or mobile device that is connected to the
network.
2. Type http://routerlogin.net or http://192.168.0.1.
A login window opens.
3. Enter the modem router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home page displays.
AC1900 Cable Modem Voice Router
Manage Your Network
101
Factory Settings on