Creating Stop Motion Animation [Stop Motion Animation] - Panasonic LUMIX DC-FZ80 Owner's Manual

Creating stop motion animation
Recording mode:
You can stitch still pictures to create stop motion animation.
• Complete the date and time settings in advance.
• Still pictures that were captured using frame-by-frame recording are grouped into a
single picture group.
1
Set the menu
→
[Auto Shooting]
[Shooting Interval]
2
Press
3
Press
[MENU/SET]
4
Press the shutter button fully
• Up to 9,999 frames can be recorded.
5
Move the subject to decide on the
composition
• Repeat the recording of still pictures in the same way.
• When you turn off the camera during recording, a message to restart recording
will appear when you turn on the camera. To start recording from the next still
picture, select [Yes].
How to create stop motion animation effectively
●
Up to two previously recorded pictures are displayed on the recording screen. Check this screen as
a guideline for determining the amount of required motion.
●
You can press [
unnecessary pictures. To return to the recording screen, press [
131
(→168)
(→43)
[Rec] → [Stop Motion Animation]
[ON]: Takes pictures automatically at a set recording interval.
[OFF]: Takes pictures manually, one frame at a time.
(Only when [Auto Shooting] is set to [ON])
Set the interval used for [Auto Shooting].
to select [Start] and press [MENU/SET]
to select [New] and press
] (Playback) button to check the recorded pictures. Press [
4K Photo and Drive Settings
[Stop Motion Animation]
(→30)
] button to delete
] (Playback) button again.
DVQP1223