Table of Contents
Advertisement
DMX Linking
The SlimPAR Q12 USB works with a DMX controller. Information about DMX is in the CHAUVET® DMX
Primer, which is available from the Chauvet website
DMX_Primer_rev05_WO.pdf.
Configuration (DMX)
Set the product in DMX mode to control with a DMX controller
1.
Connect the product to a suitable power outlet.
2.
Connect a DMX cable from the DMX output of the DMX controller to the DMX input socket on the
product.
D-Fi USB Connectivity
The SlimPAR Q12 USB is able to become a D-Fi wireless receiver/transmitter with the use of the D-Fi
USB from Chauvet DJ. Simply set the product's DMX Personality and DMX Address, set the DIP switch D-
Fi receiving/transmitting channel, then plug it into the D-Fi USB port.Press <MENU> repeatedly until 5Ch,
6Ch, 8Ch, 10Ch, 17Ch, 32Ch, or 36Ch shows on the display.
3.
Press <ENTER>.
4.
Use <UP> or <DOWN> to select the starting address, from d 1–512.
5.
Press <ENTER>.
D-Fi USB Connectivity
The PN is able to become a D-Fi wireless receiver/transmitter with the use of the D-Fi USB from Chauvet
DJ. Simply set the product's DMX Personality and DMX Address, set the DIP switch D-Fi receiving/
transmitting channel, then plug it into the D-Fi USB port.
WARNING! DO NOT plug anything other than a D-Fi USB into the USB port. Doing so
may cause damage to the product.
Once plugged in, the D-Fi USB will take over the product. Wired DMX and manual
display control / menu buttons will be unavailable until you unplug the D-Fi USB. The
priority levels are:
1. D-Fi USB
2. Wired DMX
Configuration (D-Fi USB)
1.
Set the DMX Personality and DMX address on the SlimPAR Q12 USB .
2.
Use the Chart provided to set BOTH:
•
the Channel, and then
•
The Receiving or Transmitting option
NOTE: DIP Switch 5 is for Transmitting OR Receiving, please choose carefully.
Page 8 of 17
http://www.chauvetlighting.com/downloads/
3. IRC-6 Remote Control
4. Manual Digital Display/Menu Buttons
SlimPAR Q12 USB User Manual Rev. 3
O
PERATION
Advertisement
Table of Contents
