Before First Use; Daily Use - AEG LAVATHERM 76280AC User Manual

14 www.aeg.com

9. BEFORE FIRST USE

Before you use the appliance for the first
time:
• Clean the tumble dryer drum with a
moist cloth.

10. DAILY USE

10.1 Preparing the laundry
• Close the zippers.
• Close the fasteners of duvet covers.
• Do not dry ties or ribbons loose (e.g.
apron ribbons). Tie them before you
start a programme.
• Remove all items from pockets.
• If an item has an internal layer made
of cotton, turn it inside out. Make sure
that the cotton layer is always facing
outward.
• We recommend that you set a correct
programme suitable for the type of
fabrics that are in the appliance.
Fabric label
10.2 Loading the laundry
CAUTION!
Ensure the laundry is not
trapped between the
appliance door and rubber
seal.
1. Pull open the appliance door.
2. Load the laundry one item at a time.
3. Close the appliance door.
10.3 Turning on the appliance
To turn on the appliance:
Push the On/Off button.
If the appliance is on, some indicators
appear on the display.
Description
Laundry is suitable for tumble drying.
Laundry is suitable for tumble drying at higher temperatures.
Laundry is suitable for tumble drying at low temperatures only.
Laundry is not suitable for tumble drying.
• Start a short programme (e.g. 30
minutes) with moist laundry.
• Do not put dark colours together with
light colours. Dark colours can bleed.
• Use a suitable programme for cotton,
jersey and knitwear to prevent
shrinkage.
• Make sure that the load size is not
more than the maximum stated the
programme table.
• Only dry laundry that is suitable for
tumble drying. Refer to the fabric
label on the items.
• Do not dry large and small items
together. Small items can be trapped
inside the large items and remain wet.
10.4 Auto stand-by
To reduce energy consumption, the
automatic stand-by function deactivates
the appliance:
• if the Start/Pause button is not
pressed within 5 minutes.
• after 5 minutes from the programme
end.
Push the On/Off button to activate the
appliance.
If the appliance is on, some indicators
appear on the display.