Table of Contents
Advertisement
Tap „Skip checking‟.
8.
9.
The
WiFi indicator will light white once your
speaker connected to network.
Tap „Start using my audio system‟ to find your speaker
in the list. Make sure your smart phone connect to the
same WiFi network as the speaker.
Select "ADCOM-Luna xxxxxxxxxxxx" (the 12 digit
alphanumeric code is the MAC address of your
speaker) from list, now playing screen will show.
Note: if you desire to change to another WiFi
network, press and hold MODE button on the
speaker for about 10 seconds to do a factory
reset. Speaker will restart and reset to initial
status and you can set the network again.
6
Advertisement
Table of Contents
