Philips 150V3F Electronic User's Manual page 56

Connecting to Your PC
2) Connect to PC
(a) Turn off your computer and unplug its power cable.
(b) Connect the monitor signal cable to the video connector on the back of your
computer.
(c) Plug the power cord of your computer and your monitor into a nearby outlet.
(d) Turn on your computer and monitor. If the monitor displays an image,
installation is complete.
file:///D|/03771/english/150v3f/install/connect.htm (3 of 3) [9/13/2002 1:46:50 PM]
Note: If you use an Apple Macintosh, you need
to connect the special Mac adapter to one end of
the monitor signal cable
RETURN TO TOP OF THE PAGE