Dell M6220 User Configuration Manual page 1016

Command
area-id
area nssa [no-
redistribution] [default-
information-originate
metric-value
[metric
metric-type-
[metric-type
value
]] [no-summary]
[translator-role
[translator-stab-intv
interval
]
area-id
area nssa
no-redistribution
exit
exit
show ipv6 ospf area
id
1016
Configuring OSPF and OSPFv3
Purpose
Create and configure an NSSA for the specified area ID.
metric-value
•
advertised to the NSSA. (Range: 1–16777214)
]
metric-type-value
•
following :
role
]
• A metric type of nssa-external 1 (comparable)
• A metric type of nssa-external 2 (non-comparable)
• no-summary—Summary LSAs are not advertised into
the NSSA
• role—The translator role where role is one of the
following :
• always—The router assumes the role of the translator
when it becomes a border router.
• candidate—The router to participate in the translator
election process when it attains border router status.
• interval—The period of time that an elected translator
continues to perform its duties after it determines that
its translator status has been deposed by another router.
(Range: 0–3600)
Prevent learned external routes from being redistributed
to the NSSA.
Exit to Global Config mode.
Exit to Privileged EXEC mode.
area-
Show configuration and status of an OSPF area.
—Specifies the metric of the default route
—The metric type can be one of the