ji&)rj p:~q-)gr:l&Il'f
1. Remove the front panel. Remove tape (if
any). Lift panel and take it off the cabinet.
2. Remove the shipping brackets (2).
Remove the cabinet ground screw (1)
and disconnect the green and yellow
grounding wire.
3. Remove the rear shipping screws (2)
I Slide the chassis out of the cabinet.
5. Install the drain plug and drain cup
(accessory parts) to rear of cabinet.
Slide drain cup down into rear support
between grooves in cup.
NOTE : Attach drain plug and drain cup
assemblies and attach hose before
sliding unit into cabinet.
drain cup
\
Screws
6. Fix the cabinet to the support frame.
14