Samsung GALAXY J3 EMERGE User Manual page 181

3. Tap On/Off to turn Wi-Fi on.
 Wi-Fi is enabled. You will see the names and security settings of in-range Wi-Fi networks.

To disable Wi-Fi, tap On/Off again.
4. Tap a Wi-Fi network, enter the password, and tap Connect.
 Your phone is connected to the selected Wi-Fi network.
5. Configure your Wi-Fi settings.
 Your Wi-Fi settings changes are saved.

The password, for a household wireless LAN router, is sometimes found on a sticker on the
router (WEP, WPA, KEY, etc.). Contact the router manufacturer for information. For the
password for a public wireless LAN, check with user's service provider.

Entering a password is not required if an access point is not security protected.
Connect to a Wi-Fi Network Using WPS
Wi-Fi Protected Setup (WPS) is a network security standard that allows you to easily secure a wireless
network connection between your phone and a router.
To connect using a WPS button:
1. From Wi-Fi settings, tap Advanced > WPS push button.
2. Press the WPS button on your router.
3. Follow the prompts to complete the connection.
To connect using a Personal Identification Number (PIN):
1. From Wi-Fi settings, tap Advanced > WPS PIN entry.
2. Enter the PIN displayed on your router.
3. Follow the prompts to complete the connection.
Smart Network Switch
Smart network switch lets your phone automatically switch to the wireless network data connection when
the current Wi-Fi connection is unstable.
1. From the Wi-Fi settings menu, tap Advanced > Smart network switch.
2. Tap On/Off to enable the feature.
Connections Settings 171