Change Call Rate - Cisco TelePresence DX70 User Manual

14
Call Rate

Change Call Rate

Tap the Call button, then locate the entry
whose call rate you want to alter. Tap this entry
to produce the Call menu and then tap the
More ( ... ) icon below the green Call button, as
shown.
Move the slider to the required setting.
Tap Custom call.
Tap the green Call button to place the call.
About Call Rate
Call rate is the term used to express
the amount of bandwidth allocated
to the call and is measured in kbps
(kilobits per second).
The higher the call rate is, the
better the quality will be, but on
the expense of higher bandwidth
consumption.
The system comes with a default
call rate. This is set by your video
support team as a part of the
Administrator Settings (password
protected).
Why would you like to temporarily
change this setting? In most cases
you will use it to avoid choking
the video call when you try to call
someone at a higher rate than their
system and connection actually
support.
Call rate cannot be changed during
a call, but you may change it just
before you place a call, as shown
here.
D1510413 User Guide
Cisco TelePresence DX70, DX80
Produced: April 2016 for CE8.2
All contents © 2010–2016
Cisco Systems, Inc. All rights reserved.