Applying Tamper Evidence Labels - HP 8800 Installation Manual

Manual Version: 6P101-20120928

Applying tamper evidence labels

Apply tamper evidence labels to all field replacement units (such as the
FIPS enclosure, cards, the CF card, interface cards, and fan trays) and
USB ports.
The tamper evidence labels do not come with the FIPS enclosure.
Please order them from HP. The product codes of tamper evidence
labels are JG585A and JG586A.
When you apply the tamper evidence labels, follow these guidelines:
Make sure the chassis temperature is above 10°C (50°F).
•
Clean the adhesive areas and adhere the labels after they are dry.
•
Alcohol-based cleaning pads are recommended for cleaning.
Air-dry the labels for five minutes to ensure complete adhesion.
•
White labels in the following figures indicate positions to apply tamper
evidence labels.
BOM: 3104A0C3
11
Part number: 5998-3449