Table of Contents
Advertisement
The Problem Solver
PROBLEM
WRINKLING IN
PERMANENT PRESS
AND "NO-IRON"
ITEMS (continued)
If vou need more hel~.. call. toll free:
GE Answer Center"" '
consumer information service
(continued)
POSSIBLE CAUSE AND REMEDY
Accumulation of lime scale due to use of carbonate detergents. If you must use a
non-phosphate detergent, avoid the use of a high-carbonate detergent.
Failure to use fabric softener. Proper use of fabric softener will minimize wrinkling.
wrinkles:
To remove
.
. Rerinse and dry on "Permanent Press" setting.
. If unsuccessful, retumble on high heat for 10-12 minutes and hang immediately.
. Iron carefully.
Some wrirddes may remain which cannot be removed?
out wrin~ed, the finish may not be good quality. Also, in permanent press synthetic/
cotton blends, the cotton portion of the fabric can eventually wear away leaving only the
synthetic. Since it's the cotton portion which is treated for Permanent Press, a loss or
decrease of Permanent Press performance will result.
laundry procedures and Permanent press clothes
12
Advertisement
Table of Contents
