D-Link DCS-2530L User Manual page 27

Section 3: Configuration
Enable QoS: Enabling QoS allows you to specify the Quality of Service for different
types of traffic so you can prioritize their transmission on your network.
QoS helps provide prioritization for Layer 3 traffic. If the camera is
connected to a router that itself implements QoS, the router's settings
will override the QoS settings of the camera.
Select Enable IPv6 to automatically get an IPv6 address from your
Enable IPv6:
router. If you have a static or fixed IP from your network administrator,
select Static IP address and enter the information provided by your ISP
or network administrator.
Enable Multicast for The DCS-2530L allows you to multicast each of the available streams
stream: via a group address and lets you specify the TTL value for each stream.
Enter the ports and TTL settings you wish to use if you do not want to
use the defaults.
Enable Bonjour: Enable this to allow other network devices to connect to this camera
using Bonjour.
Bonjour Name: Enter a name to use to identify this camera through Bonjour.
D-Link DCS-2530L User Manual 27