ABB 800xA User Manual page 33

Section 3 Configuration
•
•
To configure port number and encryption usage for a connection, select the Service
Structure and select the object Services/Remote Access Server/Basic, Service
Group. Select the Service Group Definition aspect and the Special Configuration
tab.
Figure 13. Remote Access Service, Special Configuration Tab
To specify the port number to use, enter the port number in the Port to use field.
Default port is 3340.
Ensure the port selected is free to use. Consult your network responsible for
information.
If the Remote Access Server is protected by a firewall, make sure the selected
port is open in the firewall.
It is possible to encrypt all messages between the Remote Access Server and the
Remote Access Client if a password is set. Checking the Encrypt traffic check box
specifies that encryption will be used. Encryption makes it more difficult to act as a
3BSE037076-510 D
Port number to use for the connection
Usage of encryption for the connection
Remote Access Server Advanced Configuration
33