Configuring The Network Connection - Siemens SINUMERIK 802D Programming And Operating Manual

Network operation
11.3 Network operation
11.3.1

Configuring the network connection

Prerequisite
The control system is connected to the PC or the local network via the X5 interface.
Entering network parameters
Switch to the the <SYSTEM> operating area.
Press the "Service display" "Service control system" softkeys.
Select the "Service network" softkey to display the network configuration window.
Figure 11-7
342
"Network configuration" start screen
Programming and Operating Manual, 07/2009, 6FC5398-4CP10-2BA0
Cylindrical grinding