Adjusting The White Balance - JVC KY-PZ100WU Instructions Manual

Adjusting the White
Balance
Adjust the white balance according to the color
temperature of the lighting. You can select the
adjustment mode according to the shooting
conditions.
As the color of the light (color temperature) varies
according to the light source, it is necessary to
readjust the white balance when the main light
source illuminating the subject changes.
Automatic White Balance Mode (FAW:
Fulltime Auto White balance)
.
1 Set the [White Balance] mode selection
button to "FAW".
Switches the camera to the Automatic White
0
Balance mode. The white balance is
automatically adjusted according to the color
temperature of the lighting on the object.
Memo :
The FAW (Full Time Auto White Balance) mode
makes automatic adjustments by sampling the
color temperature of the video to obtain the most
appropriate white balance level.
AWB Mode
1 Set the [White Balance] mode selection
button to "AWB".
2 Press the [AWB Trigger] button.
Pressing the button automatically adjusts the
white balance.
Memo :
If there are changes in the shooting environment
0
while the AWB mode is functioning, press the
[AWB Trigger] button again to adjust the white
balance.
Caution :
Do not use highly reflective objects, such as
0
metals. Doing so may result in improper white
balance adjustment.
The AWB function cannot provide optimum
0
white balance with an object outside the
adjustment range, for example when it contains
only a single color or not enough white color.
AWB Paint Adjustment
You can fine-tune the white balance that was
automatically adjusted by AWB.
1 Adjust the R and B values.
Fine-tune using the AWB paint adjustment
button while referring to the AWB paint
adjustment panel.
* Use the cross-shaped button (JK) to adjust R
value and (HI) to adjust B value.
* You can also adjust the R and B values by
dragging the point (X mark) on the adjustment
panel.
.
Manual White Balance Mode (Manual
Switching)
1 Set the [White Balance] mode selection
button to "Manual".
R/B Gain and the corresponding value are
displayed.
Example: R/B Gain R:186 B:173
2 Fine-tune using the R/B Gain adjustment
button while referring to the R/B Gain
adjustment panel.
* Use the cross-shaped button (JK) to adjust R
value and (HI) to adjust B value.
* You can also adjust the R and B values by
dragging the point (X mark) on the adjustment
panel.

Adjusting the White Balance

45