Philips Xenium 929 Owner's Manual page 7

Turn the phone face up
3 To switch on the phone.
Open the flip.
Press and hold the
5 Wait for the 2 beeps.
The connection is established. The green
LED flashes and the screen looks like this:
To set the time and date, see page 39.
7 Press .
Once connected, your phone emits two
beeps. For best reception pull the antenna
out.
L
NOTES:
1. You can hold a conversation even with the flip closed.
2. If the flip is in the closed position during a call, you can open it without affecting the call in progress.
4
key .
Before first use
4 Enter your PIN code if asked
(see page 11).
Then confirm by pressing the
Pilot Key (key
6 Enter the phone number.
If you make a mistake press
8 After the call press
).
.
.