Table of Contents
Advertisement
Adjust loudspeaker volume
:
1.
Press
key to select from
Initiate a second call (subscription dependent)
>
1.
Press
and select
OPTION
call.
Transfer call (subscription dependent)
>
1.
Press
and select
OPTION
The screen shows R4.
2.
Enter the phone number that you want to transfer your incoming calls to.
Consult phonebook
>
1.
Press
and select
OPTION
r
2.
Press
on the selected phonebook entry, the corresponding number will be dialled.
Intercom
This feature is only available when there are at least 2 registered handsets. It allows you to make free internal
calls, transfer external calls from one handset to another and use the conference option.
Intercom another handset
To be able to use intercommunication feature, you must have at least 2 handsets registered to your base
station (see page 52 "To register an additional handset").
c
1.
Press
key in stand-by mode.
2.
Intercom is established immediately if there are only 2 registered handsets. If there are more than 2
registered handsets, the handset numbers which are available for intercom will be displayed. Scroll
All Handsets
and press
m
call and press
SELECT
If the handset does not belong to SE730/735 range, this function may not be available.
Transfer an external call to another handset
1.
During the call, make a long press on
hear you).
2.
Intercom is established immediately if there are only 2 registered handsets. If there are more than 2
registered handsets, the handset numbers which are available for intercom will be displayed. Scroll
All Handsets
and press
m
call and press
SELECT
If there is no answer from the called handset, press
r
3.
Press
key on the called handset to answer the internal call, where both internal callers can talk.
e
4.
Press
key on the first handset to transfer the external call to the called handset.
Call
Volume 1
Volume
to
Init 2ND Call
to put the current call on hold and initiate a second external
Call
Transfer.
Phonebook
to access and review phonebook entries.
m
to call all the handsets or scroll to the specific handset you want to
SELECT
.
c
key to put the external call on hold (the caller can no longer
m
to call all the handsets or scroll to the specific handset you want to
SELECT
. The called handset rings.
5.
c
key to resume the external call.
EN
:
to
:
to
23
Advertisement
Table of Contents
