Configuration Mode; Handset Power Off/On And Keypad Lock/Unlock - Philips DECT 629 User Manual

Configuration mode

Before using your DECT 623/627, you need to configure it according to the country of use.
Install the batteries. After a few minutes of charging, the configuration screen appears.
Browse through the different countries.
Press SELECT to choose the country that suits you.
Browse through the list of operators.
Press SELECT to choose your operator.
Your phone is ready to be used.
If you need to re-configurate your DECT 623/627, see page 40.
Note: If BACK is pressed, the handset will show the country selection screen again.
Handset power OFF and ON
To power the handset OFF or ON long press the
Keypad lock/unlock
Long press the
14 Configuration mode / Handset power OFF/ON & keypad lock/unlock
key to lock/unlock the keypad in idle mode.
Country dependent feature
key.