D-Link DNS-320 Quick Installation Manual page 10

Step 8: In this section a summary of
the configuration will be displayed.
When ready click on the Format button
to initiate the RAID configuration. This
process will involve initializing,
formatting and configuration of the
RAID chosen.
A warning message will be displayed
before the procedure starts stating that
hard drives will be formatted and if the
user wishes to continue. Click OK to
continue.
This RAID configuration starts with
Initializing.
Then continues to format and configure
the RAID configuration.
Step 9: Lastly a configuration summary
will be displayed.
Click in the Finish button to complete
the setup procedure. This will redirect
the user to the Login screen again.
10
DnS-320