Fiat Abarth 500 2015 Owner's Manual page 182

180 UNDERSTANDING YOUR INSTRUMENT PANEL
NOTE: The brightness of the instrument panel may
change while travelling following an event that causes
switching from "day" to "night" conditions (or vice
versa) in the passenger compartment (e.g. in a tunnel, on
avenues in shadows, under bridges, etc.).
To adjust the brightness, proceed as follows:
1. Push and release the UP
set the required brightness level.
2. Briefly push and release the MENU button to go back
to the menu screen or push and hold the MENU
(approximately one second) to go back to the main
screen without storing settings.
Speed Beep (Speed Limit)
With this function, it is possible to set the car speed limit
(mph or km/h) to immediately alert the driver when the
set limit is exceeded.
or DOWN button to
To set the speed limit, proceed as follows:
1. Briefly push and release the MENU button to enter the
Main MENU.
2. Push and release the UP
select Speed Beep. Push and release the MENU
button, push and release the UP
buttons to select Speed Limit activation (On) or
deactivation (Off).
3. When the function is activated (On), briefly push and
release the MENU button to display the presently set
activation speed. Pushing the UP
buttons selects the speed limit. Push and release
the MENU button to confirm selection.
or DOWN button to
or DOWN
or DOWN