Receiving Data; Using The Phone As A Modem - Philips 900 Owner's Manual

Sending is cancelled if your phone cannot find another
device before the time out is reached, if the infrared
link is broken, or if you cancel the process.

Receiving data

Select > Receive. Your phone is then ready to
Infrared
receive an item and waits for the other infrared device
to send it. As for sending, messages are displayed on
the screen and allow you to follow the process.
Receiving is cancelled if your phone isn't contacted by
another device before the time out is reached, if the
infrared link is broken, if the size of the file sent is too
large or if you cancel the process.
Saving the data received
,
Press to access the following options:
Save To save the data, then go back to idle.
The items you have received will be
saved under their default name, which
you can change by selecting them in the
relevant menus.
To display the details of the data you
Show
have received.
To ignore the data received.
Discard
Infrared

Using the phone as a modem

Select > if you wish to use your phone
Infrared Data
as a modem. You can use your mobile phone together
with a PC or a PDA, e.g. to connect to the internet or
to send faxes.
To fully benefit from the services available via infrared
(send and receive SMS, e-mail and fax, upload
pictures and MIDI sounds in your phone, phonebook
synchronization, GPRS Wizard, etc.), you must
install Mobile Phone Tools on your PC. This software
is available on the CD-Rom shipped with your phone.
The software supplied on the CD-Rom is not
compatible with Apple
®
only supports Windows
(Service Pack 3 and up mandatory in this case).
Specific software modules for Lotus Notes, Lotus
Organizer and Microsoft Outlook are designed to
allow synchronisation from your Philips mobile
phone to these applications (refer to their respective
user guides for detailed information).
® ®
Macintosh computers. It
98 SE, ME, XP and 2000
53