Broadcast Message; Instant Message - Philips 639 User Manual

Philips639_APMEA_CTA_GB.book Page 57 Saturday, February 28, 2004 2:40 PM
In both cases (reply to an e-mail or forward it), your
phone will disconnect from the server when reaching
the network inactivity time out set in the Auto
disconnection menu (see "Bearer" page 50). It will
reconnect to this server when sending the e-mail.

Broadcast message

The Broadcast SMS feature is network-dependent.
You can or
Activate Deactivate
of SMS broadcast regularly transmitted to
Broadcast SMS
all subscribers on the network.
Reception
Allows you to set the reception of cell
broadcast messages On
Reception
On, you must define one or several
topics as described below.
Topics
Allows you to define the type of messages
you want to receive. To define a new
Topics
type, select <New>, enter the code
provided by the operator, and, if desired, associate a
name. If you select an existing type in the list, you can
change or delete it. You can enter up to 15 different
types in the list. To obtain the codes corresponding to
the different types, contact your operator.
Messages
District codes
Allows you to select the type of
messages you would like to be
District Code
permanently displayed on the idle
screen. As a result, for this special treatment of the
message, you must enter the type in both the
and the menu.
code Topics

Instant message

Allows you to set the
Instant message
the reception
When On, any short message (SMS) you receive is
automatically displayed in idle mode.
Scroll down to read it, and quickly reply by pressing
,
twice: first to enter the edition screen, then to
send your message. The phone will automatically go
or Off. When
back to the idle screen.
If you receive a second SMS while you are reading one,
c
press to exit the first one or reply to it. The
mobile phone will then display the second message.
District
feature or Off.
On
57