Display And Interface - LG C2100 Service Manual

Hide thumbs Also See for C2100:
Table of Contents

Advertisement

3.7 Display and Interface

• Main LCD
Properties
Active Screen Size
Color Depth
Resolution
Pixel Size
• Sub LCD
Properties
Active Screen Size
Color Depth
Resolution
Pixel Size
Controlled by _LCD_CS(L_MAIN_LCD_CS), LCD_RESET, ADD01(LCD_RS), _WR(LCD_WR),
_RD(LCD_RD), IFMODE, DATA[00:15](L_DATA[00:15]) ports
• _LCD_CS : MAIN LCD driver chip enable. MAIN LCD driver IC has own CS pin
• LCD_RESET : This pin resets LCD module. This signal comes from DBB directly.
• ADD01: This pin determines whether the data to LCD module are display data or control data.
• IFMODE : This can select 16bits or 8bits parallel bus. But for the future.
Default is low (low is 16bits interface)
• _WR : Write control Signal
• _RD : Read control Signal. But this pin used only for debugging.
• DATA[00:15] : Parallel data lines.
• LCD_ID[1:2] : LCD type selection signals
- LCD_ID1 : LCD maker(2.4V is SII, 0V is HyeLCD)
- LCD_ID[2:3] : for the future using
• For using 65K color, data buses should be 16 bits.
Spec.
28.022(H) X 35.03(V)
65,000
128 X RGB X 160
0.063(H) X 0.209(V)
Spec.
18.902(H) X 13.43(V)
Mono
96 X 64
0.187(H) X 0.2(V)
- 39 -
3. TECHNICAL BRIEF
Unit
mm
colors
dots
mm
Unit
mm
dots
mm

Advertisement

Table of Contents
loading

Table of Contents