Dell S4820T Configuration Manual page 1107

To display the default buffer profile, use the show buffer-profile {summary | detail} command
from EXEC Privilege mode.
The following example shows viewing the default buffer profile.
Dell#show buffer-profile detail interface tengigabitethernet 1/1
Interface Te 1/1
Buffer-profile -
Dynamic buffer 194.88 (Kilobytes)
Queue# Dedicated Buffer
(Kilobytes)
0 2.50
1 2.50
2 2.50
3 2.50
4 9.38
5 9.38
6 9.38
7 9.38
The following example shows viewing the buffer profile allocations.
Dell#show running-config interface tengigabitethernet 2/1 !
interface TenGigabitEthernet 2/1
no ip address
mtu 9252
switchport
no shutdown
buffer-policy myfsbufferprofile
The following example shows viewing the default buffer profile on an interface.
Dell#show buffer-profile detail interface tengigabitethernet 1/10
Interface Te 1/10
Buffer-profile fsqueue-fp
Dynamic buffer 1256.00 (Kilobytes)
Queue# Dedicated Buffer
Kilobytes)
0 3.00
1 3.00
2 3.00
3 3.00
4 3.00
5 3.00
6 3.00
7 3.00
The following example shows viewing the default buffer profile on a linecard.
Dell#sho buffer-profile detail fp-uplink stack-unit 0 port-set 0
Linecard 0 Port-set 0
Buffer-profile fsqueue-hig
Dynamic Buffer 1256.00 (Kilobytes)
Queue# Dedicated Buffer Buffer Packets
(Kilobytes)
0 3.00
1 3.00
2 3.00
3 3.00
4 3.00
5 3.00
S-Series Debugging and Diagnostics
Buffer Packets
256
256
256
256
256
256
256
256
Buffer Packets
256
256
256
256
256
256
256
256
256
256
256
256
256
256
1107