Alfa Romeo Giulia 2017 User Manual page 122

Activation/Deactivation
The system has four operating states:
Enabled (speed not set)
Activated (speed set)
Paused
Deactivated
Enabling/Activating
To enable the system, push and release
the button located on the left side
on the steering wheel.
On/Off Button
When the system is enabled and ready
to operate, the display shows the white
icon above dashes in place of the
speed.
120
Enabled Icons
Setting a speed activates the system.
The display shows the icon in green
with the set speed.
Note:
The system cannot be enabled when
RACE mode is active.
Warning!
Leaving the Adaptive Cruise Control (ACC)
system on when not in use is dangerous.
You could accidentally set the system or
cause it to go faster than you want. You
could lose control and have a collision.
Always leave the system off when you are
not using it.
Pausing/Deactivating
With the feature enabled (speed not
set), push the button to disable.
With the feature active (speed set),
push the button to pause. The
display will show the icon in white with
the speed in brackets. To deactivate the
feature, push the button a second
time.
Setting The Desired
Speed
The speed can be set from a minimum
of 20 mph (30 km/h) to a maximum of
110 mph (180 km/h).
When the vehicle reaches the desired
speed, raise/lower the SET switch and
release it to activate the system. When
the accelerator is released, the vehicle
will keep the selected speed
automatically.
SET Switch
While the accelerator pedal is pressed,
the system will not be able to control
the distance between the vehicle and