Additional Operation - Vcr Part; On Screen Display; Tape Counter Memory Stop; Friendly User Guide (Video Doctor) - LG LH-C6230 Owner's Manual

Additional Operation - VCR part

On Screen Display

You may easily display the clock or tape counter and
tape remaining, day, month, year, day of week,
programme channel, tape speed and VCR function on
the TV screen.
If a recording is taking place these On Screen Displays
will not be recorded onto the tape.
Press CLK/CNT to display.
1 1
VCR
Function/ STOP
STEREO
SP
Tape Speed
Day/Month/
1. 01. 03 WED
Year/Day of
Week
Press CLK/CNT repeatedly to display the tape
2 2
counter.
During playback or recording, the tape remaining is
displayed with the tape counter.
After 3 seconds the display will clear from the
3 3
TV screen, leaving only the clock or tape count-
er and tape remaining on the TV screen.
Press CLK/CNT again to remove all displays
from the TV screen.
The tape remaining will only be accurate for
E-180 and E-240 tapes.
The tape remaining indicator may not be
accurate, since it depends on the type or condition
of tape used. Also, the tape remaining indicator is
not displayed just after a cassette has been insert-
ed, or after playback or recording has begun.

Tape Counter Memory Stop

The Digital Tape Counter can be displayed on your TV
screen instead of the time by pressing CLK/CNT on the
remote control.
The Digital Tape Counter indicates the relative positions
of recordings on the tape.
Press CLK/CNT repeatedly until the counter is
1 1
displayed on the TV screen.
Press CLEAR to set the counter to 0:00:00.
2 2
Press PLAY (H H ) to start recording.
The tape counter will display the actual play time in
hours, minutes and seconds.
Press STOP when playback or recording is com-
3 3
plete.
Press BACKWARD.
4 4
The tape will rewind and automatically stop when
the counter returns to 0:00:00.
Please note: If FORWARD is pressed when
counter mode indicates a negative value, the tape
will not stop.
36

Friendly User Guide (Video Doctor)

This feature informs you that there is a problem with
your DVD/CD/VCR receiver. These error messages will
appear on the TV screen.
1 1
Programme
ARD
Channel
STEREO
Clock/Tape
Counter &
12:00
Tape
2 2
remaining
3 3

ez (easy) Repeat

BY pressing & holding REPEAT during play back, the
holding section is replayed twice automatically.
1 1
2 2
Pressing REPEAT again during repeat play, the
DVD/CD/VCR receiver will return to normal play.
Press i.
Press F F or G G to select Dr. and press OK.
VCR
VIDEO DOCTOR
Dr.
HEAD STATUS
TAPE STATUS
NO. OF TIMER PROGRAMME
NEXT TIMER PROGRAMME
OK
Press D D or E E to check a problem.
HEAD STATUS
O PLEASE CLEAN:
Clean your video heads.
TAPE STATUS
O NOT RECORDABLE:
Insert a tape with its protection tab in place
NO. OF TIMER PROGRAMME
2
O
Shows the number of timer recording.
NEXT TIMER PROGRAMME
O ARD1 26 10:00~11:00 SP
Shows the current status of timer recording.
Press i to remove the menus from the TV
screen.
During play back, press & hold REPEAT at he
point where repeat play is to be concluded.
Then, your DVD/CD/VCR receiver will go into
reverse search.
Release REPEAT at the point where repeat play
is to start.
Holding section is replayed twice automatically.
ote
i