If your device has not yet been loaded into your ECM account, you need to register. Log into the device administration pages and go to Getting
Started → Enterprise Cloud Manager Registration. Enter your ECM username and password, and click on "Register".
Once you have registered your device, go to
For more information about how to use Cradlepoint Enterprise Cloud Manager, see the following:
Getting Started
ECM on the Knowledge Base
Navigating the Administration Pages
To access the administration pages, open a web browser and type the hostname "cp/" or IP address "http://192.168.0.1" into the address bar. The
Administrator Login page appears.
NOTE: The hostname and IP address are editable; "cp" and "192.168.0.1" are the defaults. If you have changed these, input your customized hostname
or IP address into the web browser to access the administration pages.
Log in using your administrator password. Initially, this password can be found on the bottom of the router as the Default Password (this password is
also the last eight digits of the unit's MAC address). You may have changed the administrator password during initial setup using the First Time Setup
Wizard. If so, log in using your personalized administrator password.
cradlepointecm.com
and log in using your ECM credentials.