Advertisement
PLASMA 4 FRAMESET CONTENT
1. Frame
2. Fork
3. Headset
4. Seatpost
5. Storage box
SPECIFIC TORQUES VALUES TABLE
| 06
ENGLISH
PLASMA 4
| BIKE USER MANUAL
REAR DROP OUT AND DERAILLEUR HANGER
- Setup screw: Dropout length can be set to adjust the rear wheel tire clearance with
the frame (100) thanks to the rear dropout adjustement screws. The chainstays
length can be set from 403mm to 413mm.
- Loosen the screw to set a longer chainstays length,
- Tighten the screw to set a shorter chainstays length.
Make sure right and left side are set at the same length by assembling the rear wheel
and verifying it is centred with the chainstays.
- Rear derailleur hanger: place the rear derailleur hanger in the cavity and tighten
the 2x M5 screws to their specified torques.
Rear derailleur hanger: SCOTT Part number 239178
Drop out adjustment screws: Standard M5*10mm headless screw available in any
hardware shop.
BIKE USER MANUAL |
PLASMA 4
ENGLISH
07 |
Advertisement
