Connecting The Power (C27Fg70Fq* Model Only); Tidying Up The Connected Cables - Samsung C24FG70FQ User Manual

Connecting the Power (C27FG70FQ* model only)

1
3
1
Connect the power cable to the AC/DC adapter. Then, connect the AC/DC adapter to the DC 19V port
on the back of the product.
2
Next, connect the power cable to the power outlet.
3
Press the JOG button on the back of the monitor to turn it on.
― The input voltage is switched automatically.
2

Tidying Up the Connected Cables

Connect cables to the appropriate connectors.
1
VIC E
SER
DP IN
I IN 2
HDM
I IN 1
HDM
DC 19V
Run the cables through the holder in the direction of the
2
arrow from the lower part of the holder, as shown in the
image.
Pull cable down to adjust the length.
3
Use the same method to clean up the other cables.
1 4
Caution
While rotating the cable fixed on the holder, the cable may be separated or damaged. In this case, first
remove the cable from the holder.
23