Table of Contents
Advertisement
5
1) Separate the LCD from the PBA.
- With Tweezers, lift up the LCD like
picture below.
- Remove the soldering iron and then
detach the LCD FPCB.
※ Caution
1) Be care of LCD & LCD FPCB damage.
7
1) Separate the INTENNA from the REAR.
※ Caution
1) Be care of scratch and molding damage.
2) Be care of INTENNA damage.
3) Don't touch the INTENNA CONTACT.
This Document can not be used without Samsung's authorization
SAMSUNG Proprietary-Contents may change without notice
6
1) Remove the soldering iron and then
detach the MIC and RECEIVER
※ Caution
1) Be care of damage to the FPCB
8
1) Separate the SPEAKER,MOTOR and FM antenna
from the REAR.
※ Caution
1) Be care of scratch and molding damage.
2) Be care of SPEAKER & MOTOR damage.
3) Don't touch the SPEAKER & MOTOR
CONTACT.
11-2
Exploded View and Parts List
Advertisement
Table of Contents
