Denon PMA-710AE Service Manual page 5

DISASSEMBLY
• Disassemble in order of the arrow of the figure of following flow.
• In the case of the re-assembling, assemble it in order of the reverse of the following flow.
• In the case of the re-assembling, observe "attention of assembling" it.
FRONT PANEL ASSY
Refer to "DISASSEMBLY 1.FRONT PANEL ASSY"
and "EXPLODED VIEW"
FRONT PCB
(Ref. No. of EXPLODED VIEW : 2-1)
FUNCTION PCB
(Ref. No. of EXPLODED VIEW : 2-3)
VOLUME PCB
(Ref. No. of EXPLODED VIEW : 2-4)
SW/HP PCB
(Ref. No. of EXPLODED VIEW : 2-5)
About the photos used for descriptions in the "DISASSEMBLY" section.
• The direction from which the photographs used herein were photographed is indicated at "Direction of photograph: ***" at
the left of the respective photographs.
• Refer to the table below for a description of the direction in which the photos were taken.
• Photographs for which no direction is indicated were taken from above the product.
The viewpoint of each photograph
(Photografy direction)
［View from above］
TOP CABINET
POWER PCB
Refer to "EXPLODED VIEW"
POWER PCB
(Ref. No. of EXPLODED VIEW : 1-2)
POWER TRANSFORMER
Refer to "EXPLODED VIEW"
POWER TRANSFORMER
(Ref. No. of EXPLODED VIEW : 28)
5
PMA-710AE
REAR PANEL
Refer to "EXPLODED VIEW"
MAIN PCB ASSY
Refer to "EXPLODED VIEW"
MAIN PCB ASSY
(Ref. No. of EXPLODED VIEW : 1-1)
MCU PCB ASSY
(Ref. No. of EXPLODED VIEW : 2-2)
Front side