Table of Contents
Advertisement
Common Used Functions
• You can find the music from the folder where the music is placed.
First, choose the MP3 file that you want. Second, tap Run for
confirmation. If you want to go back the preceding menu, you
can tap the accelerator key [
• When you edit the MP3 play list, please tap F1 Load and then you
can have a manual operation on openning the MP3 files. Tap
F2 Auto Search , the device can auto search download data for
MP3.
• In repeat mode, please open the function of repeat, and then you
could set the beginning (A) and ending (B). This [ / ] would show
you the length of repeat. If you want to stop repeating, you would
just shut down this repeat mode.
• The function of simultaneous conveyance of music and lyrics can be
realized only if the two files with the same name and with the suffixes
as (. lrc) and (.mp3) are put into the same folder.
• The sound volume of the earphone should be not too high so
as not to injure your hearing.
• File management provides data management, new folders
created, renamed and deleted. It also allows to format the
disk, add, delete and copy folder.
SD Card
You can extend the available memory with a SD card:
(1) Multi Media Card
(2) Secure Digital Card
(3) High Capacity Secure Digital Card
Make sure the power is off
before inserting and removing
card, or the data in the
device or the card might be
lost.
].
Device Settings
Our device's initialized time is 2088/08/08 8:08
am. If you want to change this setting, you can
Time & Date
open the [World Time] window, and then choose
[Set Time].
• You can press SHIFT + 音節 to set up the
volume, speed and brightness.
Volume &
• You can set up the statup music, turning on/off
Brightness
pen and key tone, repeat times etc. through
[Sound Setting].
You can change the startup picture in the
Startup Picture
[Startup Picture] setting.
Switch among multi kinds languages of menu
Language
displays such as Chinese, English, etc. through
[Menu & Language Setting].
Our device's initialized auto power off time is
"five minutes later power off automatically". If
Auto Power Off
you want to change this setting, please open the
[Power Management].
If you want to enable/disable one kind of input
Input Method
method, you can set up in the [Input Setting].
The initialized handwrite penup time is 0.6
Handwrite
seconds. You can set up in the [Handwriting
penup time
Setting].
Touch Panel
You can adjust touch panel calibration in the
Calibration
[Handwriting Setting].
[My Setting] allows to set colors for topic,
My Setting
dictionary and desktop. It also allows to select
USB Auto Connection and Effect Control.
According to user's favorite to set [My Favorite],
you can use [My Favorite] easily to get the
My Favorite
functions which you need.
8
Advertisement
Table of Contents
