Table of Contents
Advertisement
Maintaining the washer
§ Unplug the power plug prior to maintaining.
§ Clean the filter periodically every 3 months.
Clean the filter in the inlet valve
§
§
ƒUWhen no water flows through detergent drawer, or filter is clogged with foreign material Ò no
inlet Ó is displayed on the control panel.
1
Turn off the water tap.
4
Pull out the filter with a tool or by hand and
clean it using a toothbrush.
ƒU Insert the filter in its original place.
Clean the drain pump filter
§
§
1
Open the lower cover cap
( ¥L ) by using coin.
Turn the drain plug ( ¥M)
to pull out the hose.
100
1
14
2
Unplug the power plug from
the outlet.
5
2
Unplug the drain plug ( ¥M) ,
then the water flows out,
At this time use a vessel
to prevent water flowing on
the floor. If the water does
not flow any more,turn the
pump filter ( ¥N) open to the
left.
3
3
Disconnect the inlet hose
Connect the inlet hose and check
water leakage.
3
Take out any foreign
material from the pump
filter ( ¥N). After cleaning,
turn the pump filter ( ¥N)
clockwise and insert the
drain plug ( ¥M)to the
original place. close the
lower cover cap.
3
2
2
Hide quick links:
Advertisement
Table of Contents
