HP ProLiant SL250s Gen8 Maintenance And Service Manual page 56

CAUTION: Do not press down on the processor. Pressing down on the processor may cause
damage to the processor socket and the system board. Press only in the area indicated on the
processor retaining bracket.
Press and hold the processor retaining bracket in place, and then close each processor locking lever.
7.
Press only in the area indicated on the processor retaining bracket.
Install the processor socket cover on the failed system board.
8.
Clean the old thermal grease from the heatsink with the alcohol swab. Allow the alcohol to evaporate
9.
before continuing.
Apply all the grease to the top of the processor in the following pattern to ensure even distribution.
10.
CAUTION: Heatsinks specified for processor 1 and 2 are not interchangeable. Be sure to note
the appropriate orientation on the heatsink label.
Removal and replacement procedures 56