Loudspeaker (2.5 Cm) (Sp902), Diat Pd Board - Sony SA-TSLF1H Service Manual

SA-TSLF1H/SS-CTLF1H/TSLF1H/TSLF1HW
Ver. 1.1

3-5. LOUDSPEAKER (2.5 cm) (SP902), DIAT PD BOARD

+
–
qf connector
(CN7301)
qg connector
(CN310)
qh three screws
(+BVTP 3 × 10)
10
1 four screws
(+BVTP 3 × 8)
4 loudspeaker
(2.5 cm)
(SP902)
+
–
3 harnesses
2 Take out the capacitor.
qj RETAINER board
q; PD cushion
PRECAUTION DURING PD BLOCK REMOVING
When removing the PD block, be sure to remove the
LOUDSPEAKER (2.5 cm) (SP902), and take the
capacitor out of the main unit.
The capacitor may break if the PD block is not properly
assembled. Be sure to refer to [Note on Assembling
the SA-TSLF1H] in the Service Note.
8 screw
(+BVTP 3 × 14)
9 two screws
(+BVTP 3 × 10)
ql DIAT PD board
5 two screws
(+BVTP 3 × 10)
7 PD window assy
6 two claws
qk PD bracket
qd LED board
qs connector
(CN311)
qa screw
(+BVTP 3 × 10)